Analysis Henry V Speech Battle of Harfleur Showing His Power and Role as a Leader Essay

Analysis of Henry’s speech of Harfleur showing his role as a leader and an inspiration Henry’s speech to his men before the battle of Harfleur is one of the most powerful, inspirational speeches of all time. The speech defines Henry as not only a friend unto his men, but also a powerful leader; ‘Once more unto the breach, dear friends, once more’, literally meaning to the break in the walls my friends, referring to the walls of Harfleur. Henry is conjuring his men in a rally, including soldiers, noblemen and commoners, with the use of repetition of ‘once more’ to enforce the fact that this is not the first time it has been done, bringing up the memory of the Englishmen’s warlike ancestors of which they aspire to be like, so that they will follow him in his conquest. The speech holds strong wildly exaggerated themes, to shock the public with what would happen if they were not to fight or help Henry in this great cause. The purpose is partly to prove that the men were fighting for a good reason, and so they can have faith in their leader, but also to inspire them to fight the French ‘or close up the wall with our English dead’, ironic as the hole in the wall of Harfleur is enormous and would take thousands of bodies to even half fill but a thought which would not leave you. Henry V is a negotiator, he reasons with his men, suggesting that men must not always fight, that ‘In peace there’s nothing so become a man as stillness and humility’ the soft ‘s’ sibilance adds a calming tone, and paints a picture of the ideal man, of which most men would inspire to be like, who is calm and good humoured. He goes on to contrast this with ‘but when the blast of war blows in our ears’, the onomatopoeic plosive ‘b’ sound is so loud and clear, as is the war with the imagery of ‘blows in our ears’ shows us that even the ideal man cannot ignore this, will not ignore this and that he must turn from the pacifist to the fighter. The metaphorical language depicts the man turning from the civilised human he has become, back to nature with his predatory-like mind and that he must ‘imitate the action of the tiger’ and fight for his worth as an Englishman. Dynamic imperatives are used to directly address the audience, showing Henry’s leadership skills as he is telling them what to do and think ‘stiffen the sinews, conjure up the blood, disguise fair nature with hard-favoured rage’ he is urging his men to change in state, from man to the fighter to a point of uncontrollable anger and ferocity for battle. Similes are used powerfully in addition to these imperatives; ‘like the brass cannon’ referring to the eyeball popping out of ones skull in rage, he is consuming his audience with the passion and rage of war with powerful imagery changing the atmosphere and preparing them for the battle of their lives where they are to prove themselves to the world, wildly exaggerated but very inspiring and puts him in complete control of all of their emotions, defining his status as King and leader. In addition to the metaphorical comparison between human and animal, Henry relates the feelings of war to the processes of nature; ‘galled rock’ the men are hard as rocks, both in physical power and mentality. Other images include the ‘swilled with the wild and wasteful ocean’ proving to his men that it is a natural process for one to be overpowered with rage, especially when it is for a good cause as the one he is suggesting, and that we must take what is ours (France) like the waves take control of the ocean. The men are reduced to powerless bodies; Henry goes on in his speech to control not only their minds but their bodies with ‘set the teeth and stretch the nostril wide’ the strong imagery instinctively makes you do the action which in itself grinds you and makes one feel consumed with rage, this is beyond inspiration, the men are physically empowered by the speech. Furthermore he makes it every man’s duty to their mothers to fight ‘dishonour not your mother. The sentence is short and stands out for clarity as it is an important part of his speech, he wants them to feel guilty if they do not make their mothers, of which have raised them, proud. Onomatopoeic repetition adds rhythm to the speech and commands the men to go forth with their duties with use of ellipsis; ‘on, on’ the choice to go to war is no longer a choice but a factor of life that must happen, the men have turned into the animals of war and have now become ‘noble English’ further inspiring them to be as their forefathers were. For after all their ‘blood is fet from fathers of war proof’ of which they must live up to, and the alliteration of the ‘f’ sound adds dynamicity to the speech, the war has become a physical part of them, it’s in their blood. Not only do the men want to follow in the footsteps of their forefathers, but Henry wants them to make history; ‘teach them how to war. Again another short sentence, he wants them to set the example, be the best men any King could have, slightly blowing his own trumpet there. Strong imagery of England and patriotism is used to make the men feel not only proud of their mothers and the king but also their country ‘the mettle of your pasture’ as England is seen to be fields of green countryside, much like the battlefield in which they fought. To enforce this he uses rhetorical questions ‘swear that you are worth your breeding’ of which every man would swear he is, as part of his ego but also no man wants to feel unworthy. Henry also says that he can see the drive and determination in all of their eyes; ‘noble lustre in your eyes’ metaphorical but inspiring nevertheless, he makes every man feel as though he truly can do it, he is a fighter. A further simile ‘I see you stand like greyhounds in the slips’ the greyhounds being hunting dogs, hungry for power. Follow your spirit and upon this charge’ act on your instincts, don’t think for war is something not of emotion of the weak, and as you do this you must ‘cry â€Å"God for Harry, England and Saint George! †Ã¢â‚¬â„¢ a half rhyme with charge the final couplet uses imperatives to state the cause as to which the men are fighting and boosts moral and patriotism, saint George being the patron saint of England, the final push for these men from men to soldiers.

A Separate Peace Book

I am writing this letter to inform you on reasons why I would recommend your book, A Separate Peace. After reading A Separate Peace, this book is surely one of the best books I ever read. Its interesting story line that is very easy to follow kept me curious on what was happening next. A Separate Peace’s beauty, vitality and purpose will keep every reader extremely interested. I would highly recommend this novel to young adults. I was very interested in the story’s beauty.You gave me a more detailed view on the fact that you can find a friendship in anyone, and it's very important to understand the solidarity and the very magnitude of a good friend. Also, I was very attracted to your use of symbolism from different objects to represent the relations to the characters. The quote, â€Å"He had never been jealous of me for a second. Now I knew that there never was and never could have been any rivalry between us. I was not of the same quality as he. I couldn’t stan d this†¦Holding firmly to the trunk, I took a step toward him, and then my knees bent and I jounced the limb. Finny, his balance gone, swung his head around to look at me for an instant with extreme interest, and then he tumbled sideways, broke through the little branches below and hit the bank with a sickening, unnatural thud. It was the first clumsy physical action I had ever seen him make. With unthinking sureness I moved out on the limb and jumped into the river, every trace of my fear of this forgotten† (Knowles 153), signifies the climax of the novel.Gene finally does something to potentially hurt Finny. However, what he realizes is that Finny was never trying to compete with him, that what he truly always wanted was a friendship, nothing more, nothing less. Also, the quote explains that it is Gene's first clumsy action, which makes him seem superior to Finny, but actually isn’t. I believe that this proves that Gene feels extremely lower than Finny, which pro bably caused him to jounce the limb and have Finny fall off to his bad luck.I feel people don't really know who their best friends are until they really look upon what someone has on the inside. When it comes to friendship, there could be â€Å"A Separate Peace† in someone that is completely different and you proved that very well. What else made me so interested was the story’s vitality. The vitality of the story was interesting because it shows how jealousy can ruin friendships but also people learn and grow from this. Also, the characters were never in a stable state of reality. You used the energetic style of ocial constructivism , where people create their own reality, to form a â€Å"separate peace† from war (disagreement) to the Winter Carnival (peace) created in the story, similar to the same concept of the film Fight Club directed by David Fincher. I believe your use of this kind of style was very complicated to understand prior to finishing the novel; but once I was done reading it, I understood the concept of your use of symbolism to show how the different objects and time periods relate to the characters lifestyle.Finally, the most significant and interesting part of the novel – the purpose. Most people might disagree with the purpose of the novel, since the social constructivism was difficult to understand. We all have different approaches for the novel’s purpose. Some might believe that the purpose was to get a visual on the separations of friends as we get older and how we see people for their true colors. I believe that the purpose was the characters were eating for the company of someone else to feel complete, but in order to be happy with others, they had to be happy with themselves.That’s what Gene couldn’t understand until the death of Finny. The quote, â€Å"I did not cry when I stood watching him being lowered into the family’s strait-laced burial ground outside of Boston. I could n ot escape a feeling that it was my own funeral, and you do not cry in that case† (Knowles 194), proves how close Gene felt to Finny, even at his death. Gene's feeling that it is his own funeral explains he has lost a part of himself; it is clear that Finny and Gene had become very close. He will never be the same without Finny by his side.I believe young adults will find this story very interesting. From its easy to follow story line, its views and numerous of lessons taught , young adults can relate to this novel. I believe this story will continue to be popular since it was republished 4 times since the most recent publishing in 1996. Also, others have been inspired by this story such as Meg Rosoff's 2007 novel What I Was. My one question that I ask is thou many readers have different opinions about the novel’s purpose, what is the original purpose you explained?

Country analysis Essay Example | Topics and Well Written Essays - 1500 words

Country analysis - Essay Example sser powerful sections of the society are prone to expect and accept a powerful autocratic force which acts in paternalistic format and is not in favor of democratic rights of the lesser powerful. b) Ranking2 – The ranking of Mexico 81 suggests that Mexican society experiences lesser degree in distribution of power and wealth. The general mass of the society expects and accepts the superiority of few and has to live with the socio-cultural set-up of the society that has the concentration of power and wealth in few hands. d) Analysis of the difference in ranking – Over 40 ranks differentiates USA from Mexico which means that while in Mexico workplace there is a marked difference between superiors and subordinates and both consider themselves different from one another. While in USA the process of work tends to be bit more democratic and subordinates are expected to provide their views to management. a. Definition3 – individualism outlines the degree of integration of groups among individuals of the society. Individualistic societies are marked by higher degree of stress put on individualistic nature and personal achievements. On the other end of individualistic societies, we find collective societies which are dominated by individuals who remain part of a common group, which are generally marked by huge extended familial ties and relations. b. Ranking4 – The ranking of Mexico 30 which clearly outlines the state of individualism in the Mexican society which is marked by higher degree of collective groups than reliance on the achievements of individuals. d. Analysis of the difference in ranking – The work culture and business systems of individualistic society tend to do business on performance basis contracts whereas in collectivistic society like Mexico the business is usually carried out through family links. a. Definition5 - This defines the society’s tolerance or the lack of the same for uncertainty and ambiguity. It is reflective of the degree

Technology and a youth community(you chose) Essay

Technology and a youth community(you chose) - Essay Example This essay discusses how youth communities today utilize technology in order to sustain the community and maintain their identity. Special focus is on the UK Youth Climate Coalition. Youth communities make important contribution to development in a society. These mainly are forums or platforms that enable young people in the society to acquire different skills that are vital for effective participation in society. Different youth communities are concerned with different aspects in society. While some youth communities are concerned with climate, others might focus on drugs, education, gender, discrimination, rights and freedoms, politics, youth empowerment, and youth leadership, among others. Overall, youth communities today have a positive impact in society, as well as on the lives of the participating youth. Apart from developing various skills, the participating youth are also exposed to various opportunities, and learn to be responsible team players and leaders. Owing to the benefits of youth communities, it is therefore, important that they are sustained, and their collective identity is maintained. Nonetheless, technology remains a major way that promotes the identity and sustenance of youth communities. The UK Youth Climate Coalition is a UK-based youth organization formed in the year 2008 and comprises youth between the ages of 18 and 29. Run by unpaid volunteers, the UK Youth Climate Coalition focuses on the area of climate change and envisions a world in which the environment is well protected, clean, safe and sustainable for all humanity (UK Youth Climate Coalition Web). In order to realize this vision, the UK Youth Climate Coalition focuses on important areas such as education, energy, jobs and the economy, transport, as well as the international community; as these act as stepping stones to making the organization’s vision become a reality. As a considerably large and popular youth community, the UK Youth Climate Coalition

Growing Criminal Law Special Issues Assignment Example | Topics and Well Written Essays - 1000 words

Growing Criminal Law Special Issues - Assignment Example Growing Criminal Law Special Issues The U.S. Department of Justice (2011) notes, there is need of urgency in addressing growing criminal special issues. The department observes that most public opinion polls rank crime and fear of crime as one of the most important issues that need to be addressed. Racketeering is one of the special crimes and is becoming a growing issue in criminal law; it’s part of organized crime whose main aim is to entrench continual patronage (Eskridge, 2010). Administrators and public policymakers in the criminal justice system are paying more attention to this growing issue in the criminal law and its complexity. There is need for traditional criminal justice system to undergo fundamental rethinking that aims at responding appropriately to this growing criminal law issue. Therefore, criminal justice policies such as community corrections, policing, imprisonment, sentencing, and adjudication needs to be changed in significant way to respond to these eme rging special issue in criminal law (Neese, 2003). ... First it is important to understand how RICO criminal defense practice came about. This practice emerged as a result of the Racketeer Influenced and Corrupt Organizations (RICO) Act which was passed by the Congress in 1970 Blakey (2008). The Act was appropriate at that time as the Congress was seeking to eliminate the adverse consequences of organized crime on the economy of the United States. Since then, the Act has been expanded to include several other procedures of crime. Neese (2003) notes that the Act plays critical role in enabling the federal government in fighting international and national dimensions of organized crime such as racketeering. The fact that organized crimes and racketeering in particular is a threat to public safety cannot be disputed. That is why for over the years particularly in the 1970s and the early 1980s, the RICO criminal defense practice has been performing relatively well (Blakey, 2008). However, it has been noted that in the most recent of times the performance of this practice has declined considerably. Anderson and Jackson (2004) argue that this decline is highly attributed to the effort that the United States government is putting to crack down on organized crimes. In particular, the government has focused on two main areas in its fight against these crimes; business that are employing individuals who are not legally allowed to work in the United states and focus on illegal immigrants who are engaging in organized crimes. The U.S. Department of Justice (2011) notes that organized crimes such as those covered in the RICO Act are being perpetrated by the immigrants especially from Russia thus undermining creation of the rule of law efforts. This explains the reason why the fight against organized crimes has

Promotion Plan for an Indoor Go Kart Track Essay

Promotion Plan for an Indoor Go Kart Track - Essay Example This indoor track with all its latest engineered tracks and karts is one of the finest tracks around. Go karting has been famous among the young people and the main aim would be to attract them. Advertising Printed advertising is the most effective way to reach people. Newspaper is a powerful promotional tool which reaches everyone. Advertising in newspapers is the perfect start to the campaign. It reaches most homes and has the power to attract a lot of youngsters and families. It is hugely popular among the young people since it gives amazing racing environment. A monthly advertising will keep the people interested and make them come back. Advertising will be done when there are any additional features included in the indoor track. Another powerful medium of printed advertising is magazines and journals. A number of popular magazines and journals get printed either weekly or monthly. These magazines are followed by a lot of people and are an important advertising tool. Technical, h ealth, racing and sports magazines are mostly preferred by the younger generation. Targeting these magazines and advertising in them will catch the eye of many. Discount coupons and free first ride offer will be printed along with the advertising in newspapers and magazines. Our new technology karts will be highlighted in the newspapers and magazines and the DP4 kart being the latest of all. ... With the advancements in technologies, it has become easier to reach people whenever and wherever possible. Internet and Email have now become a common medium for communication. Sending mails which highlights the features of the indoor event will attract first time customers. Emails can be sent to retain and enhance customer relationship by notifying via mails when new features are introduced and inviting them. Internet with millions of web pages is the hub for majority of people in the world. Attractive videos and images of the tracks, races conducted and the location will grab the attention of users. Videos displayed on websites related to racing, sports, games and even search engines will help in showcasing its features. Advertising on the web during live broadcasting of racing events, sports and streaming channels will get the interest of a major lot. Outdoor advertising is one another powerful promotional tool. Images of the latest karts or the upcoming races will be pasted on t he billboards to attract people. The logo of Go karts of Bowie along with its tag line â€Å"Fun on wheels† will be displayed on the internet, newspapers, magazines and bus boards to enhance reputation. Marketing collateral Marketing collateral is a term used for printed materials used to present information about your business and its capabilities, products or services (smallbusinessnotes.com). These can include brochures, flyers, charts and business cards. A personal business card is a must which will reveal our identity. It will highlight the attributes of the indoor go kart along with its whereabouts. These are used to share with people during social events, parties or during formal introductions. Brochures contents range from a wide

Ch 1 Essay Example | Topics and Well Written Essays - 750 words

Ch 1 - Essay Example Discuss This From Deming’s Point Of View. You Should Focus On The High School Level. Merit pay can be defined as the bonus paid to the employees in terms of their better performance (Union of Canadian Correctional Officers, â€Å"Merit Pay†). It can be stated that merit pay has also been given to the teachers for their better performances in teaching the students. Deming’s 14 Points can be observed as the series of points designed for enhancing the performances of a company’s management and for providing appropriate training to the employees to perform better in the allotted tasks (Pippenger, â€Å"W.  Edwards  Deming’s  14  Points  of  Management†). From Deming’s 14 Points viewpoint, it can be observed that politicians and educational boards are emphasizing more on merit pay in order to improve the teaching quality of the teachers in guiding the students effectively. In relation to the context, it is assumed that the educa tional boards desire to implement business models into the operational process in order to operate efficiently similar to industry or company. This is because Deming’s 14 Points help the employees to improve their working effectiveness through creating long-term and positive relationship with the company. Keeping in knowledge about the consequences after the implementation of Deming’s 14 Points, it can be stated that the politicians and the educational boards can seek to implement the principles of Deming in order to enhance the teachers’ quality along with strengthening the relationship among the teachers, students and higher officers of the high school (Winn and Green, â€Å"Applying Total Quality Management to the Educational Process†). However, it is also observed that merit pay to the teachers also can play a negative role because the merit pay in the high schools can destroy the thought of working in a team along with breaking the relationship among the teachers in teaching students effectively (Ravitch, â€Å"My View: Rhee is wrong and misinformed†). Question 2: Each Person In The Group Should Select One Of Deming’s 14 Points And Relate It To A Personal Experience They Have Had At College. Discuss The Benefits Obtained From The Point Being Used Or Discuss The Problems Caused From The Point Not Being Used. Be Specific In Your Response. According to the presented scenario, ‘every employee should be involved in transforming the management according to Total Quality Management (TQM) approach in order to succeed in enjoying the full advantages of the planning’ principle has been selected among the 14 points of Deming’s principles for fulfilling the objective of the paper. From the personal perception about this principle, it can be stated that every member or staff of a college should be involved in the decision making process. It would facilitate to ensure that every staff has the proper and righ t information about the strategies that have been considered in the operational process for improving or developing their educational processes in order to facilitate information sharing and train students for better qualification. By implanting this principle within the colleges operations, they will enjoy certain advantages while achieving their primary objectives. The advantages that can be identified include the fact that through the incorporation of this process, the teachers would work in a team or in a group in order to lead the educational process of a college systematically and communicate with each other effectively

Nursing care for dying children Essay Example | Topics and Well Written Essays - 1000 words

Nursing care for dying children - Essay Example Hockenberry and Wilson (2013: 9) provide frameworks in which RN’s should operate under to ensure a child’s wellbeing. Ewing (2009:83) encourages nurses to promote healing given the fact that death remains inevitable. Hockenberry and Wilson (2013) echo the sentiment; they give avenues in which the nurse may interact with the patient without affecting his or her thinking ability. The choices to be made are personal and need not to be interfered with. Child’s welfare needs to be included while caring for them. Giving hope and creating an ample environment would be useful in the Care of Dying Children. Ewing (2009) provides two possibilities in the care; they include paediatric palliative care and end- of- life intervention. The patient according to the article needs to be joyful and given hope while at the nurse’s care. It gives an example of the child being asked to draw pictures of his or her joyful moments in life. Ewing (2009: 83) indicates that those children suffering for terminal illnesses suffer from low esteem and other personality disorder. He indicates that most of the children perceive themselves to be different from the rest. Hockenberry and Wilson (2013) introduce an aspect of anticipatory socialization, which tend to make children feel equal even with strangers. The aspect according to Ewing is lost to children with terminal illnesses. The author advocates for psychological support where the child would be used to identify a problem and the nurse act as an intermediary in offering solution. The author also suggests communication as an aspect in caring for dying children. The article gives incidences in which communication may be used in managing personality disorders among the children. The family being an important unit in the care of the children, Hockenberry and Wilson (2013) suggest their involvement in the management of children with terminal illnesses. Ewing

Assessing risks arising from contamination of the aquatic environment Essay

Assessing risks arising from contamination of the aquatic environment with Bt toxin from GM corn (maize) crop litter in the USA - Essay Example (National Agriculture Statistics Service, 2009) Hypothesis: To find out the impact of BT toxins on the aquatic environment if used without extensive risk assessment. What is the first impression you get when you hear the term, â€Å"Genetically Modified Food†? In recent years, speculation has renewed over the full effects, and possible consequences of genetic modification of organisms for the production, and augmentation of human food supplies. It is worthwhile to identify the specificities of the techniques involved to produce BT crops, as well as other biotech innovations. To understand potential environmental and biological risk factors involved we must delve into precisely what does and does not occur with genetically modified crops. This study will explore techniques involved in producing genetically modified foods, their importance to agriculture, and the nature of the BT molecule/toxin. In addition, two other research projects will be summarized which explore possible s ide effects of BT toxin dispersing into the environment, as well as the frequency of that dispersal in the water table. BT technology must be a subject of discussion, both due to the popularity of this technique, by which pesticides can be incorporated directly into plant tissues constitutively – and the possible far-reaching ramifications of such an inclusion. Both of these studies focus on corn/maize due to its prevalence – but virtually any vegetable that has utility for humans is a possible target for genetic modification, in the interest of greater profit towards an increase in the human food supply. GENETIC MODIFICATION Genetically modified organism(GMO): An organism is "genetically modified", if it’s genetic material has been changed in a way that does not occur under natural conditions through cross-breeding or natural recombination. Bacillus thuringiensis (Bt) is a spore forming bacterium that produces crystals protein (cry proteins), which are toxic to many species of insects. (University of California San Diego) GM crops are made using technology which allows Bt toxins to be introduced into crops, making them resistant to pests. For centuries, human beings have attempted to incorporate desired traits both in animals and plants of human utility. Selective breeding has been employed to both as a means of eliminating undesirable traits, such as excessive ferocity in certain breeds of dogs, and greater sugar content as well as size increases for fruits and vegetables. Using ancient techniques agriculture was limited to working within a single species in order to identify desirable, and undesirable traits - and then through successive generations to concentrate those virtues within the species that proved of highest economic benefit to humanity. Or as the case may be, to winnow out those traits that ran counter to human interests. Genetic modification broadens the set of tools available to agriculture, agribusiness, and eventually to animal husbandry. What if we were not limited by the genes within a single species? What if it were possible to use genes from virtually any species and incorporate them into crops? Perhaps the particular globular proteins present in a deep-sea fish which

Mobile and Wireless Security Essay Example | Topics and Well Written Essays - 1250 words

Mobile and Wireless Security - Essay Example and Dasgupta, P., 2003). An attacker can easily connect to the wireless network using wireless media and create a separate access point for provisioning of service to the network users. Users are forced to route traffic through the rogue access point where the attacker can either sniff information or even alter or destroy it (Godber, A. and Dasgupta, P., 2003). The attacker can attach viruses to downloads and infect the user devices. Thus the wireless networks are required to be secured from such attacks. A2. Increased usage of mobile devices by the work forces in corporate calls for implantation of security measures in wireless networks. The vulnerabilities of a wireless network are required to be overcome to prevent attacks in the form of eavesdropping, spoofing etc, resulting in loss or compromise of sensitive data. Thus there exists a requirement to formulate and implement a wireless security policy to disallow unauthorized access to the corporate networks using wireless media and allow only approved and authenticated users to be connected. IPsec VPN provides an easy and robust solution by incorporating tunneling, strong authentication and encryption procedures. The aim of the policy is to lay down standards for establishment of wireless connection from remote location to the XYZ corporate intranet. The policy also gives out detailed system requirements to be in place before the remote user is actually allowed access to the corporate resources. This remote access policy is designed to prevent damage to the corporate network or computer systems and to prevent compromise or loss of data. The policy details are as under:- The remote user shall connect using virtual private networking (VPN). VPN is a private network providing services to selected or authorized group. The network is 'virtual' as it builds on public physical networks by tunneling through it (Qu, Wie and Srinivas, S., 2002). VPN services are classified as LAN interconnect, dial-up and extranet (Venkateswaran, R., 2001). VPNs can be implemented at network or data link layer. Client Check The wireless network should be segregated from the intranet by employing a front-end firewall with the intranet. Firewall restricts broadcast traffic and saves STAs and APs from the intranet users. Anti-virus software must be installed and operational. Ensure that the client satisfies the set criteria else deny access or allow only limited access to the extent that he can access required software to meet the requirement. Connection Type. STAs should get connected to the corporate protected intranet through APs after IPsec VPN authentication (Weber, Chris and Bahadur, Gary, 2002) (For wireless IPsec VPN, the basic components are wireless clients or stations (STA) and a wireless access point (AP). APs act like hubs that connect to the STAs and provide pathway from wireless network to other existing network.). Authentication. IPsec authentication between STA and intranet should be done using Kerberos or client

Attributes of entrepreneur Essay Example for Free

Attributes of entrepreneur Essay Confidence positive thlnklng is a major step In the direction of success 5. Positive thinker entrepreneur are positive thinkers. Wealth does not always come to the most intelligent or the most ambitious individuals. Patience -when one owns who his business, there will be times when feels like the roof of craving-in. 7. Decisiveness one should go with his intuition and trust that he is doing the right thing 8. Experience component for growth as a key 9. Information seeking entrepreneur should seek information with client and competitors, seek advice. 10. Perseverance must be willing to persevere during rough times 11. Drive needs to be totally committed 12. Risk taking prefer tasks, which provide them some challenges 13. Innovation creative, they do things in new and different ways 14. Opportunity-seeking readily identifies opportunities for going into or to improve his business 15. Demand for efficiency and quality entrepreneur always strives to find ways to do things better, faster and at a lower cost 16. Systematic planning and monitoring introduces some system in achlevlng his goals by breaking this goal Into short term and long term goals 11. Persuasion and networking easy establishes a network or personal and business contacts around them

Types Of Software Testing Computer Science Essay

Types Of Software Testing Computer Science Essay Software testing gives independent view of the software to which allow the business to understand the risks of implementating the software. The software Test system are not limited to executing a program or application to finding software bugs in existing software or the developed one which has created for customer request. Software Testing can also define as the process of validating and verifying software programe, application and product meets the business requirements which helped to design and developthe software.The most software testing occur when requirements fulfilled and system has developed for execution of programe. Software Testing Team The software testing mostly done by professional software testers. The software tester term was used generally until 1980, but after 1980 the software tester term became a proper separate profession. In software testing there were many roles has been established like,Managers, test lead, test designer, tester and test administrator. Functional Testing The functional testing normally takes test to vereify some specific function of the code and also action of that code.These kind of testing normally found in those documentation of code requirements.The functional testing of software normally takes to answer some following question i.e.user are ables to do thisor does particular part of codeing or feature work. NON Fnctional Testing The Non functional testing normally takes test of software that could not be related to specific function,user action.like security.The Non functional testing normally takes to answer following question for example how many user can log on at once or is it possible to hack this software easly. Software validation and verification: The software testing can take place in association of validation and verification of software. Verification: The verification of software testing means that to know if Software which has developed is that built right.for example it fulfill or match the user requirements or specification of software. Validation: The validation of software means that have we built the right software.i.e.is it that software which customer wants to be built. The software Testing Methods The box approach There issoftware testing approach which can taken to perform software testing. The Box approach The box approach manly divide into two parts Black box testing white box testing Black Box Testing The black box testing will treat software as black box,that means this testing will take without knowing any knowledge of internal implementation of software.The Black box testing approach include.fuzz testing,model based testing and specification based testing. Specification-based testing: The specification testing use to test the functionalty of software system according to requirements.The software tester inputs the data and will only be able to see the output on test object.This type of testing normally requires some test cases to provided the tester and the tester can verify that data with given input the output of testing either is or is not same as it was expected . The specification testing is important or necessary but this would not be good for some certain risks. White Box Testing. The white box testing is another method which test the software.The white box testing method is done when the tester has internal access of data structures and programe code that implement .Here is few types of white box testing API Testing Code Coverage Testing Fault Ijection Testing Static Testing API Testing: The API stands for application programming interface .The API testing will test those application which using both public and private API. Code Coverage Tsting:This testing purpose is to test some code coverage.For example The software tester will take test on all programming code to execute once while testing the software. Fault Ijection Testing:This testing purpose is that improve the code coverage. Static testing:In static testing all the testing which took in white box testing is static testing. Testing Levels There are few testing level Unit Testing Integration Testing System Testing System Integration Testing Regression Testing Alpha Testing Beta Testing Security Testing Unit Testing:The unit test is takes to test the functionality of some particular section of programe code.This testing normally takeing at functional level of programe.for example In Object Oriented language this testing will be taken at class level,the unit test in object oriented include destructor and constructor.these tests are normally written of those testers who work on coding to make sure that every specific part of codeing is working properly.In this testing there could be many tests taken at one fuction of coding.The only unit testing can not test the functionalty of software.The software works independently.The unit testing also called component testing. Integration testing:The integration testing is type of software testing that verify the interfaces between components against a software design. The components of software could integrated in an repertation of process or together .The integration software testing will test to find the defects in the interfaces and interaction between integrated components. The large number of software tester groups will test all the elements of design of system and will test until the software works perfectly. System Testing:The system testing will tests the complete system to make sure the software fulfill all requirements. System Integration Testing:The system integration testing is that if any third party or external member wants to intergate with this system will be able to do and the system define the system requirements. Regression Testing:The Regression testing means the tester will focus on finding a defect after the major part of coding for some reasons has been changed.In this testing the software tester focus on old errors that could occur again.Those regressions happen whenever software functionality which was working before test but stops working after that.The regression happen when some code changes,for example when the newly built code of software collide with old code or existing code.The mane purpose of regession testing is that testing that software which has already been tested means retesting again whether the previously resolve fault may have come back.The fully testing is happen when software is in release phase and when there will be risk for developer will add some more features.The changes depends on early part of builting a software. Alpha Testing:The alpha testing is that which have been done by the end user ,customers or an independent means the actual user who is going to use this software will test this software at developers site.The alpha testing is normally done before the software will go sale or before handing to customer.i.e.off the shelf testing after this software will go for beta testing Beta Testing:The beta testing will take after alpha testing.The beta testing means that the software will release for limited people outside the developers to check the functionalty of software.The other purpose of testing is the further testing will take to find bugs or faults.sometimes the beta version of software will release to open public to get more feedback from maximum number of peoples. Security Testing:The security testing is most important for any software that process the personal details of customers data .The security is important to prevent system from hackers. Sample Testing Cycle There is commonly used cycle for testing.The below sample is very commonly used with in organisations which is using waterfall development model. Requirements analysis: This phase should begin in requirements phase of software development life cycle.In design phase tester work with software developer determine what design of software is testable. Test Planning: The test planning or test plan in this there will be many test taken so there should be plan for testing. Test Development:The test developer or Test procedures, test data, to use in testing software. Test Execution: The tester will execute the software based on plan and will report any bugs or errors to developer. Test Reporting: In this phase once the testing is completed then tester will make final report on their test which they have taken throw many phases and report will show whether the software is ready to release or not. Test result analysis: The test result analysis or Defect Analysis,is normally done by the developers with client and make them sure what defects should be treated.for example the software is working properly or it could be done later. Defect Retesting:In this phase once defect has dealt by developers than it will bw retested by testing team. Regression Testing: In any programe it is likely to have samll testing program built into software to test when user wants and it make sure when new development or fixed software and modfied will come to software will not disturb the software completely.The complete software will working properly. Test Clousure:After completeing all test and test fulfill the exit requirements than it is important to key outputd ,logs and documents related to software should kept safe for future development..

Project Life Cycle in Construction

Project Life Cycle in Construction The project is broken into phases, and then into control points that are relevant to the particular development. This gives management an organized structure to the overall development. Cooperatively, the project phases are known as the project life cycle. These are sequential. Phases and control points are agreed by management. Due to the complex nature of the office block phase will overlap the concurrent phase. This method will also fast track the project. Overlapping phases can save time and cost however the risk of discrepancies is increased due to progression without accurate information being available from the previous phase. The first phase initiates the project by establishing a need for the office spaces. A P.E.S.T analysis is generated to determine the objective. Perth has seen a significant growth in the number of National and Regional headquarters servicing the Mining, Resource and Oil and Gas sectors. It has been reported that a further 250,000 offices are required in Perth by 2014. F, Murphy. (2011). P.E.S.T. Analysis A PEST analysis was created for this project and the following information was recovered. (P)olitical Political is the factors that influence the project. These can be government, economic or even other business. Political factors represent policies such as taxes and environmental. The current rate of GST in Australia is 10%. J, Scully. (2012). this is added on to all purchases. Due to the client being a mining company a 30 per cent mining levy will also be charged, which was introduced in March 2012 for companies who have profits above $75 million. (E)conomic Economic refers to areas unique to economy and directly influenced by economy or comprised by economy, areas such as inflation rate and interest rate. With inflation rate reaching 1.5% in June 2012. P,Flynn. (2012). If the Inflation rate changes it would cause a dramatic impact on the development cost and profit margin. If an increase in the cost of capital and materials/labour rose then the break-even rate from this project would change. The cost of labour and materials could raise enough to deem the project unsuccessful, an increase in the cost of capital would significantly increase the cost of the project. All these areas can greatly influence the development, making them of high importance within the PEST analysis. (S)ocial Perth city is undergoing going a shortage of office space due to the growth in the mining industry. Many companies are expanding and require larger office while on the other hand many businesses are being created. The development has had a large increase in population over the last 10 years. (CSO 2011) this is mostly because of the mining boom, people started to relocate into Perth. 5.2 Organizing and preparing Once it has been proven that the project is viable the design and development phase commences. This involves outlining the build-method and developing detailed schedules and plans for making or implementing the product. Feasibility study and cash flow forecast are generated as part of this section. Feasibility study A company maybe trading successfully but if it does not have money to pay bills and wages then the company fails. Cash flow throughout the refurbishment of the office block will be an on-going requirement. For the business to succeed it needs efficient funds at all times. A profitable organisation can become bankrupt if they do not have enough cash to pay day to day bills. Factors such as expanded too ambitiously, or not receiving payment from debtors can cause this. To prevent from occurring a developers budget will be developed. 5.3 Carrying out project work This phase will implement the project as per the scope of work and design drawings. The Longest sequence of activities in the project will have to be completed on time to insure project is not delayed. A Critical path shows this and makes it possible to control all phases of the project. 5.4 Closing the project: The final phase of the development is closure. This confirms the development has been built to the design specification. There are various testing and procedures to be implemented these include inspections and any remedial work that may result from the inspections. In addition a checklist which includes certifications and approvals is signed off, finally a set of as built drawings are handed over before contractor receives final payment. Commission check list will be given to the contractor and all components will be checked and approved by superintendent before hand over to client. Commissioning of all equipment is undertaken and any faults are amended before all reports are handed over to the client. All Licences, certifications and registrations that are necessary by Australian Workplace Standards, shall be provided prior to the client accepting the project. A Defect liability period (DLP) of six months shall be in place and confirmed by the Australian Workplace standards. Adequate training sessions are held to educate the line managers in each sector. As-constructed or as-removed information must be submitted, prior to the project handover meeting. Executive control points are used in the development, this act like check points allowing progression on executive approval. These reinforce the construction manager on decisions to progress on the project. As the project proceeds through its lifecycle, the clients financial commitment and liabilities increase. At each control point a full management review is undergone this provides assurance that the development can progress to the next phase. It is determined that it costs about 10 times as much to implement a change during construction. This information gives the manager a level of control over the profile and timing of the project. The construction manager can therefore ensure that their project can be customized with minimum delay to the overall project. Equally, these formal approvals supply the project manager with the ability to drive the development to closure. It also provides guidance . The most significant control point in the project is the conclusion of the development phase. This symbolises the projects progression from feasibility to implementation. Feasibility studies provide this information. This information is document into a Project Brief. This gives the client an over view of what to expect. The project life cycle is subdivides the development into manageable project phases, in turn then are then subdivided into an input, process and output format. The following table shows the different components of the project lifecycle Control Points Each Phase is aligned one or more specific objectives for monitoring the project. These phases are all related the principal phase; the names are typically taken from their input into the development. Milestone and hold-points are created these provide focal point for the project team and impose control. These will close control of the interaction between activates to ensure full and proper integration and to minimize conflicts or misunderstandings. The contraction Phase is the most critical and every effort will be made to ensure all milestones are met. Close management is required to ensure delays are addressed. There are five control points that are key to the success of any project. Effective project management: make sure the safety, cost and schedules are implemented in the plan. Management staff is to understand and follow the projects critical path. Critical milestones play a significant part in sustaining an effective development. Cost management: The most effective approach is to develop a cost management function which focuses on all purchases. Budget control and expenditure tracking will be the most important. Supplier performance management: A QA (quality assurance) will reduce risk and improve the overall project. This improves third party performance which improves relationship with stakeholders. Healthy stage gates: develop a holistic capital project program with a control point for evaluating progress and enabling informed decisions about next steps. In addition to minimizing rework on front-end engineering and design, improve cycle time and generating punch lists for handoff maintenance, this discipline makes the project move more effectively. Early involvement is essential Risk assessment and reduction: To ensure the project is completed to a high standard cost controls and quality controls are implemented. This is completed on a day to day basic. Life cycle structure normally follows the following stages: Cost and staff requirements are high at the intervill of the project and slowly decrease as the project draws to a close. Figure 3 illustrates this. Stakeholder influences, risk and uncertainty are greatest at the start of the project. These decrease over the life of the project. Within the context of the generic life cycle structure, a project manager has the option to increase control over certain deliverables if required. More intricate projects may require additional level of control. In such instance, the work carried out to complete the projects objective ay benefit from being formally divided into phase.

Personal Narrative on Divorce :: Narrative Essay Marriage

It was the last Saturday in December of 1997. My brother, sister, and I were chasing after each other throughout the house. As we were running, our parents told us to come and sit down in the living room. They had to tell us something. So, we all went down stairs wondering what was going on. Once we all got down stairs, the three of us got onto the couch. Then, my mom said, â€Å" Well†¦Ã¢â‚¬  â€Å"Your mother and I†¦Ã¢â‚¬  interrupted my father. â€Å"Are getting a divorce, † said my mother, completing his sentence. I was five at the time, so I had no idea what a divorce was. I then asked a ton of questions. â€Å"What’s a remorse?† I asked â€Å"Divorce,† corrected my older sister, Jennifer, â€Å"D-I-V-O-R-C-E. Not remorse, or whatever you said!† My mother then answered my question saying, â€Å"A divorce is when†¦Ã¢â‚¬  I could see her eyes watering, â€Å"two married people don’t want...to be married anymore.† â€Å"Will we still live here?† I asked â€Å"No,† answered my mother. â€Å"Will we ever see Daddy again?† asked Jennifer. â€Å" Well of course, † answered my father, â€Å"It’ll just be like I’m out of town for a very long time. Y’all will see me every other weekend.† My older brother, Jonathan, was very quiet at the time. I think he was quiet because he was the only one of the three of us who truly knew what was going on. With me being at the tender age of five, I was very confused of what was going on. I thought that Jonathan, Jennifer, and I would live in a house by our selves and that both my parents would visit us from their separate houses every now and then. Most people would think that I’m depressed, but I like to think of my parents’ divorce as something positive that has happened in my life.

A Comparison of Orlando and Othello Essay -- comparison compare contra

Orlando and Othello In her novel Orlando: A Biography, Virginia Woolf draws upon Shakespeare's Othello to both enhance the images within her novel through allusion and further Orlando's character development using juxtaposition. Spanning about 400 years, various historical eras, and gender ambiguity in the characters, Orlando is certainly not a traditional novel. Thus, it follows that its use of historical information and literature breaks from convention as well. This is true for Woolf's use of Shakespeare's Othello. While the play is drawn upon in various contexts, from character traits to plot line, Woolf carefully places her allusions such that they support her plot line at one moment while they may be inconsistent at another. This works well within her novel because as she breaks from convention by utilizing multiple timelines and shifts in gender and sex for her characters she is able to shift in her parallels from the characters in Othello to the characters of Orlando. These shifts accen t the changes she is making within her characters and plot line and also force the reader to break with the long standing views of gender and "otherness" established in Shakespeare's work. During the first half of Orlando: A Biography, Woolf clearly draws off of the play Othello. At times this is clearer than others. In both Orlando and Othello, there is little reference to Othello by name. He is referred to instead by an ethnic background--he is the Moor. One might question the certainty of the Moor representing the figure Othello in the novel Orlando. In the case of the play, it is quite obvious that Othello is being referred ... ...his ideal of love. Orlando is jealous because of actions he observed Sasha make. While it seems that he would have more of a reason to be upset, he does not take the same magnitude of action. While is does have a long term effect on his life, he eventually moves on with his life instead of destroying it. 1 Orlando, pg. 13 2 Orlando, pg. 15 5m 3 Haines-Wright, Lisa and Kyle, Tracy L. "Fluid Sexuality in Virginia Woolf" Virginia Woolf: Texts and Contexts New York, NY: Pace University Press, 1996 4 Byles, Joan M. "The Winter's Tale, Othello and Troilus and Cressida: Narcissism and Sexual Betrayal" American Image: Studies in Psychoanalyss and Culture 36, no.1: 81 5 Byles, Joan M. "The Winter's Tale, Othello and Troilus and Cressida: Narcissism and Sexual Betrayal" American Image: Studies in Psychoanalyss and Culture 36, no.1: 83

The Development of Marriage :: Expository Essays Research Papers

The Development of Marriage Marriage has gone through many changes throughout its history. It's earliest forms date back to the story of creation. It has developed a great deal since then. It is a simple fact that men and women can not survive without each other. Marriage is part of the created natural order, we were meant to be together. God intended for us to be united with the opposite sex since the beginning of time. The book of Genesis tells us: "God created man in his image, He created him in the image of God, man and woman, He created them. God saw what he had done and said, "This is good, it is not good that man should be alone."(McLachlan 5). Marriage is inherently good and pleasing to God. It was part of God's original plan for mankind. It is also shown that Jesus held marriage in great esteem, for it was at a wedding where he performed his first public miracle. Furthermore, it is Jesus who raises Marriage to a Sacrament of the New Law. Our Lord is also the one who told us that divorce was wrong. He says, "What God has joined together, no human being must separate."(Matrimony 1). Although what we were told by God, in many primitive civilizations marriage was primarily industrial. During early times husband and wife were not much together; they did not even eat together very often.(The Marriage Institution 1). Their marriages were always planned by their parents and in some cases brides were bought. Polygamy was also frequent in the early history of marriage. Although, as civilization progressed monogamy became the idealistic goal of human sex evolution.(The Marriage Institution 6). In addition, as civilization advanced, marriage became more seriously regarded and the wedding ceremony became recurrent. The marriage ceremony grew out of the fact that marriage was originally a community affair and also primitive man had no records, so the marriage had to be witnessed by many people. The Catholic marriage is set apart from all other relationships because Catholic marriages are a sacramental path to sanctity. Paul wrote that marriage is a true sacrament and the sign of the conjugal union of Christ and his Bride, the Church.(Matrimony 2). At Lateran Council II in 1139, it was first defined as infallibly true that matrimony is as true a sacrament as Eucharist and baptism and at The Council of Lyons II in 1274, it was included among the list of seven sacraments.

I am Filipino Essay

Every race around the world has different culture and beliefs and in that difference sometimes they even fight because of that contrast. One of the races known around the world is the Filipino. The Filipino people (Filipino: Mamamayang Pilipino) or Filipinos are an ethnic group native to the islands of the Philippines. According to the 2010 Census, there were 92,337,852 in the Philippines and about 10-12 million living outside the Philippines. There are around 180 languages spoken in the Philippines, most of them belonging to the Austronesian language family, with Tagalog and Cebuano having the greatest number of native speakers. The official languages of the Philippines are Filipino and English and most Filipinos are bilingual or trilingual. The Philippines was a Spanish colony for over 300 years, leaving what can now be called Filipino culture and people semi-Hispanicized. Under Spanish rule, most of the Filipino populace embraced Roman Catholicism, yet revolted many times to its hierarchy. Due to a colonial program, almost all inhabitants adopted Spanish surnames from the Catalogo alfabetico de apellidos published in 1849 by the Spanish colonial government. As neither past governments nor the modern National Statistics Office account for the racial background of an individual, the exact percentage of Filipinos with Spanish ancestry is unknown. What is being a Pinoy all about–aside from pointing with our lips and having an action star for our President? It’s our character. Filipinos are carry many qualities which set them apart as people. One of that characteristic is the strong belief of the Supreme Being or also known as Faith of God. Filipino may have different religions in different sectors of our country, but what is consistent is that we have one strong form of faith in the Supreme Being. Supreme being also known as God/Diyos for Christians or in Islamic as Allah, sometimes called as Bathala, Kabunian, Ginoo, and others. We Filipino are also known as respectful because of the great respect for our elders. Other countries call their elders by their name but here in Philippnes we used Kuya, Ate, Lola, Lolo, Tito, Tita, Mama, Papa and more. From the â€Å"mano† to saying â€Å"po† and â€Å"opo† to our elders, these words that are part of our language show how we respect people. In our culture we always respect and follow what our parents and adults advise us to do. Not talking back, and trusting the adults around us has always been a part of who we are. One of the examples of the respect is following the beliefs by our elderly. Traditional Pilipino values have clearly influenced beliefs and practices pertaining to child rearing, medical care, disability, and death and dying. Each of these areas is detailed in the following sections with respect to more traditional views. Formal studies of Pilipino child-rearing beliefs and practices have shown considerable consistency in their findings (Church, 1986). Moreover, the specific socialization patterns and training for desirable childhood traits and behaviors (particularly during infancy/toddlerhood and early childhood) are highly consistent with other Asian cultural groups. However, Pilipino child-rearing beliefs and practices are reinforced within a traditional family structure and 1 extended family system with characteristic similarities and differences relative to other Asian cultures. Filipinos are also having close family ties. We enjoy having and knowing family members are around us. From cousins, aunts, uncles and grandparents, some family’s share their homes celebrate holidays and lends a hand to a relative in times of need. The complete centrality of family life and the importance of family loyalty, obligation, and interdependence are previously described. These values are supported by a family structure and kinship ties that reflect the multicultural Pilipino heritage. Having withstood Hispanic Catholic influence, the ancient Malay tradition of equality between men and women translates into a bilateral extended kinship system. Both the mother’s and father’s lineages are of equal importance. Thus, for example, names may be inherited through the male line or both the father’s and mother’s family name; it is not unusual for the mother’s maiden name to be given as a child’s middle name. Inheritance patterns further call for equal division between daughters and sons (Aquino, 1981; UPAC, 1980). The Filipinos are a helpful people. They live the members of their family, their relatives, neighbors, friends and even strangers. If the family is poor, the members help one another and the elders sacrifice for the education of the younger ones. The bayanihan spirit makes it possible for the people to build houses, move houses, plant crops, harvest crops, build roads and other things with little expense. The people of the community help one another in doing this. Bayanihan is also an occasion for fun because it brings the people of the community together. It means getting together or helping one another in a common project or work. Many hands make light work is the idea behind the bayanihan. When we have people visit our homes, we always welcome them with smiles, conversations, and foods. This is one of the most popular qualities of Filipinos. Foreigners who have gone to the Philippines find themselves falling in love for their hospitality. It’s a different kind of values which already existed thousands of years ago. Examples of hospitality that they show not only to foreign but also to their fellow citizens. This is observed when one person has nothing and they tend to share what they have to them. When one visits a friend’s house, they greet them with a very warm welcome. They let their visitor sit down and prepare them a meal or a snack plus drinks for them. They may not want you leave the house with an empty stomach. They make sure you had a great time visiting them. They offer their guest room to their visitors if they’re going to spend the night with them. Meals offered are very special, if not, they make a way to prepare great tasting food that their visitor wanted to eat. Majority of our livelihood in the Philippines is based on agriculture. It takes a lot of back-breaking work to plant the fields. Them it takes patience to care, water and to harvest. We Filipinos are hardworking people to the fact that they are willing to work several time to almost whole day just to feed their families. That’s how Filipinos are. One example of a hardworking person is a farmer, they earn so little but still they tend to work very hard for few bucks. Filipinos always find ways to earn for a living like putting. 2 up a small business from their home wherein they sell foods or other items for the convenient of their neighbors as well. . During the times we don’t have means to accomplish something, we find ingenious ways f using what we have to solve our problems that’s why we are also known as resourceful and creative. And because we’ve been through a lot of trials in our history, Filipinos have learned not to be depress. Rather, we find jokes and have fun even during our difficulty. An Asiawide (minus Japan) consumer survey has found that Filipinos and Thais are the happiest in the region while people of Hongkong worry about their jobs, the economy and their waistlines. The survey was conducted before the outbreak of SARS in China and elsewhere. The survey report, made by the advertising group TBWA Hongkong, was based on focus groups and five major surveys over three years in seven Asian locations. There were more that 15,000 respondents with a bias towards those aged 25 to 35 who were thought to lead the culture in Asia. The report, titled â€Å"marketing Premium Brands in Asia†, said Hong Kong people scored minus 27 on the researchers’ happiness index, compared to minus six in Taiwan, minus two on the mainland, plus six in Singapore, 10 in Malaysia , 11 in Thailand and 12 in the Philippines. The index compared the number of people who classified themselves as â€Å"very happy or â€Å"happy† against those who said they were â€Å"unhappy† or â€Å"very unhappy†. Those who said they were â€Å"okay† were excluded. Filipinos were not only the happiest among those surveyed, but were also the least body-conscious. Only 18 percent regarded themselves as overweight compared with 47 percent of Hongkongers saying they were â€Å"too fat† or â€Å"a bit fat†. We also don’t like to waste anything since we don’t have a lot. We are careful of what we have, knowing that it will serve as for a long period time which also make us Filipinos thrifty and frugal. The Filipinos held their womenfolk in high regard. The women where highly respected. When walking together, men walked behind them. They were accorded equal rights to men by their customary laws, like they could own and inherit properties. They could also engage in trade and industry. The alone enjoyed the privilege of giving names to their children. When there was no male successor to become chief of barangay, a woman could become one. Filipinos are the sweetest and loving people in the world. I don’t know why, I’m not saying this because Im a Filipino but dude, you’ve got to know them well. Men are so sweet and romantic when it comes to love, they will send you flowers, bring you to a very romantic place, they text you sweet quotes and often tell you how special you are to them. Filipino women are also romantic and very caring, that makes foreigners want to marry a kind like them. Women tend to prepare dinner before their husband comes home. They are so loving that they value the relationship which make them so faithful to their husband. And they will love you for the fullest.

Bill Ryan

Some of the information he knows off the top of his head and other information he has to search for the correct response before he answers the customer question. He states this when he makes te comment about his favorite customer questions is the ones he have to do deep research for. Factor 2, Supervisory Controls Level 2-5 650 points. The supervisor provides administrative direction with assignment in terms of broadly defined mission or function. The employee has responsibility for independently planning, designing, and carrying out programs, projects, studies or other work.The reason why I picked Level 2-5 is because Mr. Ryans supervisor is never mentioned. The general mission of giving customer service is mention. Mr. Ryans explain how he handles his day , he independently planed, designed, and carried out programs, projects, studies or other work. He does not deal with his supervisor on a consistent basis throughout the day. Factor 3 Guidelines Level 3-1 25 points. Specific, deta iled guidelines covering all important aspects of the assignment are provided to the employee.The employee works in strict adherence to the guideline; deviations must be authorized by the supervisor. The reason why I choose Level 3-1 is because Mr. Ryan refers to policy and procedure several times in the case. There are obviously guideline he must follow when it comes to his work. Whether it be the 24 hours the company has to reply to a customer’s email or, the guidelines for handling a dispute. These guideline have been set for MR. Ryan and his colleagues to follow so the know how to handle the customer and their situation properly.Factor 4, Complexity Level 4-2 75 points. The work consists of duties that involve related steps, processes, or methods. The decision regarding what needs to be done involves various choices that require the employee to recognize the existence of and difference among a few easily recognizable situations. Actions to be taken or responses to be made differ in such things as the source of information the kind of transaction or entries, or other difference of a factual nature. The reason why I chose Leve; 4-2 is because Mr.Ryans work is semi repetitive, like he stated he may not get the same question 50 times in a row but his question do repeat themselves every couple of emails. The only factors that differ are† sources of information the kind of transaction or entries, or other difference of a factual nature† other then those factors the questions are â€Å"easily recognizable situations† Factor 5 Scope and Effect Level 5-2 75 points The work involves the execution of specific rules, regulations, or procedure and typically comprises a complete segment of an assignment or project of broader scope.The work product or service affects the accuracy, reliability , or acceptability of further processes. I choose level 5-2 because Mr. Ryan job is to handle the customer service aspect of Half. com. He executes specifi c rules, regulation and procedures to complete the service for half. com. His customer service position is often in the middle of customers having a pleasant experience with half. com and continuing to shop from their website or it can make the customer experience worst and the customer can decided to never use their services again. Factor 6 Personal ContactsLevel 6-1 10 points . The personal contacts are with employees within the immediate organization, office , project, or work unit, and in related or support units. Beside dealing with the customers, Mr. Ryan mostly deal with the different department that handle customer issues. In one of the paragraphs Mr. Ryan explains how he had to get in touch with Matt Walsh who is in charge of fixing catalog errors. This is the only time he speaks about contacting someone other than his buyers or sellers, and the person he contacted was in his immediate organization.Factor 7 Purpose of Contacts Level 7-1 20 points. The purpose is to obtain, clarify or give facts or information regardless of the nature of those facts. Mr. Ryan may contact other department to obtain information for his customer service issues. The issues can range from easily understood to highly technical and the information obtained is to answer his customer questions that they emailed in. Factor 8 Physical Demands Level 8-1 5points. The work is sedentary. Typically, the employee sits comfortably to do the work. We know this is a fact about Mr.Ryans job because he talks about how sitting down all day bother some people but it doesn’t bother him because he works out after work. Factor 9, Work Environment. Level 9-1 5 Points The environment involves everyday risk or discomforts that require normal safety precautions typical of such places as offices, meeting and training rooms, libraries, residence, or commercial vehicles. We already know that Mr. Ryans work in an office sitting at a cubicle. His environment involves everyday risk or discomforts t hat require normal safety precautions. Total points 2115 GS Grade 10

How might it influence an approach to international politics? Essay

In British usage the definition becomes derogatory precisely at the time that the idea of the modern nation-state is becoming ever more dominant. If we turn to the American voice of Emerson, though, a clear difference in tone emerges. We may see Emerson seek to determine the dualism between the local and the universal without recourse to the particular structures of state government. Emerson’s Kantianism is obvious in â€Å"Politics,† where he claims that â€Å"a conceptual of the codes of nations would be a transcription of the common conscience. † In Emerson’s description of the new man we can also hear the particular bulk of nineteenth-century American political thought become conjugal to this cosmopolitanism, as he calls for â€Å"men who are at home in each latitude and longitude, men of universal politics, who are involved in things in proportion to their truth and extent. † (Stephen E. Wicher, 1957), 309 This is certainly an enlarged view of the world, one in which the particular vigor and adventurousness of Americans will lead towards a lately refreshed cosmopolitanism. Cosmopolitanism in this framework seems to grow directly out of the power of individual men, almost bypassing the community completely, and in this way the tension between local and universal appears to be determined. Yet obviously Emerson’s thought also rests resolutely on its particular understanding of the American individuality and its relationship to the world. One might say then that his universalism is beached in the United States, much as Montesquieu was grounded in France. Until it is practically eclipsed by nationalist emotion in the last years of the nineteenth century, this fundamentally paradoxical cosmopolitan receptivity lurks within much American social discourse, emerging not simply in the appeal to universal humanism which surrounds the new discourses of social improvement in the 1890s, but also in the popular press discussions concerning American achievements in science, technology, and world exploration. Though, cosmopolitanism comprises politically compelling reasons. If cosmopolitanism cannot bring an explicitly and directly political program, it is at least a step toward this kind of internationalist political education. Cosmopolitanism is a condition that concerns to only a fraction of humanity who can give it. A common stereotype of cosmopolitans illustrates privileged, politically uncommitted elites – made up of wealthy corporate managers and (a few! ) academics and intellectuals – who retain their condition on the basis of autonomous wealth and a globetrotting lifestyle. In this classification, cosmopolitanism is a matter of consumption, an obtained taste for music, food, fashion, art, and text from all parts of the world. Second, cosmopolitanism refers to a principles or philosophy. modern political philosophers lean to divide themselves into communitarians, who believe that moral principles and obligations are or must be grounded in specific groups and contexts, and cosmopolitans. The final urge us to see ourselves as ‘citizens of the world’, forming a worldwide moral community of humanity unswerving to universal ideals of human rights. An alternative of this extensive argument is whether cosmopolitanism can be submissive with nationalism and patriotism. Third, the idea is used to refer to a political project, a new order of transnational political structures exercising what is at times described as ‘cosmopolitan democracy’. The idea implies a layer of global governance which limits the dominion of states and yet is not itself a world state. Cosmopolitan institutions would co-exist with states and would supersede their authority in particular spheres of activity. The institutions most considered for their potential to assist in the comprehension of such a cosmopolitan project are the United Nations and the European Union. the majority of the work on this topic remains somewhat abstract. A remarkable exception is the work of Martha Nussbaum, who has detailed a detailed vision of cosmopolitan education. In the study of international relations, David Held is the leading scholar and supporter of cosmopolitan democracy. For Held, ‘cosmopolitanism . . . seems to explicate, and offer a compelling elucidation of, the classical conception of belonging to the human community first and foremost, and the Kantian conception of subjecting all beliefs, relations and practices to the test of whether or not they allow open-ended interaction, uncoerced agreement and impartial judgment’ (Held 2002 : 64). Beck argues that the initiative of Americanization suggests a national understanding of globalization that is defectively adapted to the transnational world of the Second Modern Age. Rather, he proposes ‘rooted cosmopolitanism’, a cosmopolitanism that draws uniformly on the local. This serves to disperse the binary thinking that still tends to distinguish discussions on post-colonialism. The ‘otherness’ of others is renowned, and at the same time the sociological mind can be freed from its methodological nationalism and can grip a cosmopolitan perspective, with all the consequences this entails for the field.

Power Flow Control Using Facts Devices Engineering Essay

With the increased capableness of power system web, increased complex tonss and with the interstate power transportation, the control of power in both transmittal and distribution lines has gained premier importance. The conventional method of power control utilizing power sloughing is no more cost effectual and causes power perturbations in the system. Alternatively a smooth control of power is the alternate solution to get the better of the above job. Fast response existent power control will be necessary to take transients, maintain rotor angle stableness and supply equal post-contingency control of the web. Reactive power flow capableness on the other manus will function to minimise line VARs flow under normal runing conditions while maximising flows necessary to keep voltage stableness during the undermentioned eventualities. Power flow control may besides be strategically used to minimise or cut down the demand for transmittal enlargement. In general, the control action in power systems can be categorized as on/off of uninterrupted ( including measure wise uninterrupted ) . The uninterrupted controls for illustration can besides be categorized as either coevals based or web electric resistance based. The web electric resistances used for uninterrupted control can be either physical or practical ( non-physical ) reactive or resistive constituents. Virtual constituents are presented to the web via interpolation of controlled synchronal electromotive force beginnings shunt connected to the coach and/or connected in series with transmittal lines. Development of high power and high exchanging power electronic devices has made it possible to command big power flows utilizing FACTS devices.Structure of the power system ( Kundur )Electric power systems vary in size and structural constituents. However, they all have the same basic features. Are comprised of three-phase ac systems runing basically at changeless electromotive force. Generation and transmittal installations use three-phase equipment. Industrial tonss are constantly three-phase. Single stage residential and commercial tonss are distributed every bit among the stages so as to efficaciously organize a balanced three-phase system. Use synchronal machines for coevals of electricity. Prime movers convert the primary beginnings of energy ( fossil, atomic, and hydraulic ) to mechanical energy that is, in bend converted to electrical energy by synchronal generators. Transmit power over important distances to consumers spread over a broad country. This requires a transmittal system consisting subsystems runing at different electromotive force degrees.Power flow in an a.c. systemIn ac power system, given the in important electrical storage, the electrical coevals and burden must equilibrate at all times. To some extent the electrical system is self modulating. If coevals is less than burden, the electromotive force and frequence bead and at that place by burden goes down to be the coevals minus the transmittal losingss. However, there is merely a few per centum border for such self-regulation. If electromotive force is propped up with reactive power support so the burden will travel up, and accordingly frequence will maintain dropping and the system will fall in. Alternatively, if there is in equal reactive power, the system can hold electromotive force prostration. Demand for electrical energy uninterrupted to travel steadily ( F19 )Reactive power demand ( text book diabetes mellitus tagare )The reactive power demand of big public-service corporations like the province electricity boards in India can be divided into two groups. Fixed KVAR required by the public-service corporations to: maintain their transformers energized and to cover their KVAR for the distribution system to transport a minimal base burden. Variable KVAR to cover load reactive power demands non covered by the consumer reactive power demands by the public-service corporations transformers and distribution system to transport variable consumer burden.Ripples and power system transeunt analysis [ T 11 ]Ripples are utile for transeunt analysis. Much of power system analysis is steady province analysis. However in the country of electric power quality analysis, transients may presume an of import function. For illustration, it is sometimes necessary to cipher the extension of a lightning shot urge in a radial distribution system or a networked transmittal system. The transient created by a communicating failure of an electronic convertor might hold to be analyzed in some instances. The computation of the extension of transformer inpouring and shunt capacitance exchanging currents is besides transeunt jobs. A choice of power system transients appear in tabular array. Type Location Duration Lightning Overhead circuits  µs – MS Line exchanging Transmission and stand in transmittal system  µs – MS Capacitor exchanging Transmission and Distribution systems  µs – MS Communication failure Converters MS Transformer inpouring currents Transformers in transmittal and distribution systems. ms – s Analysis of these transients might be done in the clip sphere, in the frequence sphere or parallel simulation. These methods have their advantages and disadvantages. But all are stressed in the analysis of short clip transients assorted with low frequence signals. Ripples offer certain clip frequence advantages over strictly frequence sphere methods. The window of a ripple ( and besides a transform based on the ripples ) is automatically adjusted in breadth in the presence of long or short term signals. The female parent ripple in a ripple transform employs clip compaction or dilation instead than frequence transition as might be used in Fourier analysis. Besides it may be possible to choose the female parent ripple to fit the expected response- there by contracting ripple spectrum as compared to the frequence spectrum. Rebeiro is by and large credited with proposing ripple analysis for power system/power quality analysis. Rebeiro chief part apart from the cardinal suggestion of ripples on power technology is in the country of signal Reconstruction. Robertson, Camps, Mayer and Gish have late proposed the usage of ripples in power technology to: Capture power system transients for event recording equipment applications. Report power system perturbations Detect inchoate failure of equipment. Resolve power quality struggles. ( Hingorani )Series CompensationWhen a generator accelerates and angle ? additions /?t & A ; gt ; 0, the electric power transmitted must be increased to counterbalance for the extra mechanical input power. When the generator decelerates and angle ? decreases /?t & A ; lt ; 0, the electric power must be decreased to equilibrate the deficient mechanical input power. K = grade of series compensation = Xc/X 0 ? K ?1 Ninety is the reactance of the series capacitance. Ten is the entire reactance of the line at the cardinal power system frequence degree Fahrenheit. K = upper limit when /?t & A ; gt ; 0 K = 0 /?t & A ; lt ; 0 with maximal k the effectual line electric resistance lower limit. i.e the electromotive force across the existent line electric resistance is maximal. i.e the electric power transmitted over the line is maximal. With minimal K i.e K = 0. The effectual line electric resistance is minimal. i.e the electromotive force across the existent line electric resistance is minimal. i.e power transmitted is minimal. This means K is controlled in bang-bang operation. ( the end product of the series compensator is varied between the lower limit and upper limit ) This type of control is the most effectual for muffling big oscillations. Sustained oscillation below the cardinal system frequence can be caused by series capacitive compensation. It is called sub synchronal resonance ( SSR ) . Degree of series compensation is in the scope of 25 to 75 % . A capacitance in series with the entire circuit induction of the transmittal line ( including the appropriate generator and transformer escape induction ) forms a series resonant circuit with natural frequence fc = 1/2?vLC = fv Xc/X. If the electric circuit is brought into oscillation ( by some web perturbation ) so the bomber harmonic constituent of the line current consequences in a corresponding bomber harmonic field in the machine which as it rotates backwards comparative to the magnetic field produces an jumping torsion on the rotor at the difference frequence of f – iron. if this difference frequence coincides with one of the torsional resonance of the turbine generator set, mechanical torsional oscillation is excited, which in bend farther excites the electrical resonance. This status is defined as bomber synchronal resonance. Large generators with multi phase steam turbines which have multiple torsional manners with frequences below the power frequence are most susceptible to stand in synchronal resonance with series capacitance compensated transmittal lines. The series compensator is chiefly applied to work out power flow jobs. Fixed or controlled series capacitive compensation can besides be used to minimise to stop electromotive force fluctuation of radial lines and prevent electromotive force prostration. Series compensation is used to command to antagonize prevalent machine swings important transeunt stableness betterment for station mistake systems Highly effectual in power oscillation damping. However the operating and public presentation features of the two types of series compensator are well different.Approachs to governable series compensationTwo basic attacks: Thyristor switched capacitances and thyristor controlled reactors to recognize a variable reactive entree. Switch overing power convertor to recognize a governable synchronal electromotive force beginning. The series compensator is a reciprocal of the shunt compensator. The shunt compensator is functionally a controlled reactive current beginning which is connected in analogue with the transmittal line to command its electromotive force. The series compensator is functionally a controlled electromotive force beginning which is connected in series with the transmittal line to command its current. The map of the series capacitance is merely to bring forth an appropriate electromotive force at the cardinal Ac system frequence in quadrature with the transmittal line current in order to increase the electromotive force across the inductive line electric resistance and thereby increase the line current and the familial power. By doing the end product electromotive force of the synchronal electromotive force beginning a map of line current the same compensation as provided by the series capacitance is accomplished. However in contrast to the existent series capacitance the SVS is able to keep a changeless compensating electromotive force in the presence of variable line current or controlled the amplitude of the injected compensating electromotive force independent of the amplitude of the line current. The series reactive compensation strategy utilizing a exchanging power convertor ( voltage beginning convertor ) as a synchronal electromotive force beginning to bring forth a governable electromotive force in quadrature with the line current as per IEEE and CIGRE definition termed the Static Synchronous Series Compensator ( SSSC ) . The SSSC can diminish every bit good as addition power flow to the same grade merely by change by reversaling the mutual opposition of the injected Ac electromotive force. The rearward electromotive force adds straight to the reactive electromotive force bead of the line as if the reactive line electric resistance was increased. If the injected electromotive force is made larger than the electromotive force impressed across the unsalaried line by the sending and having terminal systems that is if Vq & A ; gt ; |Vs -Vr| so the power flow will change by reversal with the line current I = ( Vq & A ; gt ; |Vs -Vr| ) /Xc The SSSC can supply capacitive or inductive compensating electromotive force independent of the line current up to its specified current evaluation. The VA evaluation of the SSSC ( solid province convertor and matching transformer ) is merely the merchandise of the maximal line current ( at which compensation is still desired ) and the maximal series counterbalancing electromotive force. VA = Imax * Vmax. The control scope is uninterrupted from -1.0 p.u ( capacitive ) to +1.0 p.u ( inductive ) volt-amperes. In many practical applications merely capacitive series line compensation is required. One of import application is the coincident compensation of both the reactive and resistive constituents of the series line electric resistance in order to maintain the X/R ratio is high. At transmittal electromotive force degrees of 115,230 and even 340KV where the X/R ratio is normally low ( in the scope of normally 3 to 10 ) , a high grade of series capacitive compensation could farther cut down the effectual reactive to resistive line electric resistance ratio to such low values at which the increasingly increasing power demand of the line and associated line losingss and possible electromotive force depression would get down to restrict the catching active power. The SSSC with an appropriate District of Columbia power supply ( which could be powered from an accessible coach or from the Tertiary of handily located transformer ) would be able to shoot in add-on to the reactive compensating electromotive force, a constituent of electromotive force in anti-phase with that developed across the line opposition to antagonize the consequence of the opposition electromotive force bead on the power transmittal. In this manner by supplying coincident and independently governable compensation of both the reactive and existent electric resistance of the line in consequence an ideal reactive line can be created for maximal power transmittal. The line losingss I2R is still be dissipated by the physical line. However this debauched power would be replenished by the SSSC from the subsidiary power supply. The existent power compensation capableness could besides be used efficaciously in minimising loop power flows by equilibrating both the existent and reactive power flows of parallel lines. From the point of dynamic system stableness reactive line compensation combined with coincident active power exchange can besides heighten power oscillation damping. During the period of angular acceleration, the SSSC with suited energy storage can use maximal capacitive line compensation to increase the familial active power and at the same time absorb active power to supply the consequence of a muffling resistance in series with the line. During the period of angular slowing, the SSSC can put to death opposite compensating actions, that is, apply maximal inductive compensation to diminish the familial active power and at the same time supply the consequence of negative opposition ( i.e. a generator ) to provide extra active power for the line ( negative damping ) . In practical SSSC the electromotive force sourced convertor on the dc side is terminated by a finite ( and comparatively little ) energy storage capacitance to keep the coveted District of Columbia runing electromotive force. ( Remember that this District of Columbia capacitance is kept changed by the energy absorbed from the system by the convertor itself ) therefore the District of Columbia capacitance in consequence interacts with the Ac system via operating switch ( valve ) array of the convertor. This interaction may conceivably act upon the bomber synchronal behavior of a practical SSSC. The SSSC is based on the synchronal electromotive force beginning construct which is implemented by a electromotive force beginning convertor. WAVELETS ( A18 ) Ripples theory is the mathematical associated with constructing a theoretical account for a non-stationary signal, with a set of constituents that are little moving ridges, called ripples. ( A16 ) in the procedure of ripple transform the signal is non in footings of a trigonometric multinomial, but by ripple generated utilizing the interlingual rendition ( switch in clip ) and dilation ( compressed in clip ) of a fixed ripple map called the female parent ripple.

Market Competition Timing and Risks while entering or exiting a market Essay

Market Competition Timing and Risks while entering or exiting a market - Essay Example The researcher states that for example, Amazon.com started its business as an online bookshop but as gradually the demand for the grocery items had increased, Amazon.com adhering to that demand and started its first online grocery shop. As we see in the case of Monopoly where there are no competitors and therefore firms set a price to maximize profit and gain the first mover advantage. Whereas in a perfect competition there are no entry and exit barriers so the role of time in deciding the entrance or exit from the market is minimal and perfectly competitive firms are free to enter and exit an Industry and so in the case of Monopolistic competition in which there is a relative freedom of entry and exit out of industry but a difference between those two terms is that in Monopolistic competition the firms are not ‘perfectly’ mobile but they remain unrestricted by any government rules and regulations, start-up costs or any substantial barrier to entry which is the total opp osite of Oligopoly in which there are significant barriers to entry where time plays a major role in determining the entry and exit from the market. A firm has to evaluate several factors in order to determine the risks of new entrants and the reasons to exit a market which include â€Å"economies of scale, product differentiation, capital requirements, access to distribution channels, cost disadvantages independent of scale and government policies†... The term Economies of scale refers to increase the production of a commodity due to which the per-unit cost is of a commodity is reduced. This will create a risk for the new entrant firms in a sense that they would have to produce a larger quantity at a lower price. Economies of scale encourage the firms to exit the market that cannot produce the required quantity and it deters the smaller firms from entering into the market. These bigger firms forces the new entrants to either come in on a large scale or to accept a cost disadvantage (Porter, 1979). Product differentiation is a risk for entering into the market because it requires incurring expenditure and great deal of money to make the product differentiate among its competitors. Another type of risk is capital requirement where new entrants are required to invest larger amounts to compete efficiently in an industry; particularly if the capital is required for the research and development. The initial cost to operate can be so lar ge that it restricts all but the larger firms. The capital is not only required for fixed facilities but also for the inventories and absorbing start-up losses. While bigger firms have the financial resources to tap any industry but the huge capital investments in industries such as mineral extraction and computer manufacturing has major risks and limits the pool of entrants. Even the big firms do compete in this trio there is still no guarantee for success. Access to distribution channel is another type of risk in which a firm needs to obtain distribution for the channel and the distributors are not likely to deliver the product until they are paid good incentives and that will lead to profit reduction for the firm. For example, a new food product enters